Nov
8
Upgrade Your Kitchen To An Antique Look
November 8, 2009 | Leave a Comment
You aren’t especially enamored of a modern looking kitchen done up in stainless steel and glass and seeming like it belongs in the bridge off a big rocket. You prefer the warmth and solidity of study antique furniture set among the wealthy gloss of well-aged wood. You want your kitchen, done up in this way, but aren’t certain how to glaze kitchen cupboards to reach this effect.
Glazing refers to the process of finishing wood in order that it seems like it has aged naturally and gracefully. Don’t worry if you make mistakes, because these are simply fixed. You only need to clean the area where the mistake has been made with thinner before the glaze starts to dry.
The first step is to create a glaze that you’re going to use. When paint is mixed with water, the resulting glaze is known as “a’wash”. Experiment confidently with the proportions until you have achieved what you’re attempting to find. Add more paint for a darker look and less paint for a lighter look
If you are working on a light-colored surface and wish to make it darker, you can think about using oil based glaze.
Wipe off any excess with a cloth that’s freed from lint, and repeat the process until you have achieved the finish that you would like. Let each coat dry totally before applying the next and make sure that the area used for the drying process is free from dust, which would adhere to the surface and ruin the effect.
Use a high-quality paintbrush to apply the glaze making certain that it has been spread liberally, and so the glaze has penetrated into the grain. Wipe off any excess with a cloth that is free of lint, and repeat the process till you have attained the finish that you want. Let each coat dry completely before using the next and make sure that the area used for the drying process is free from dust, which would stick to the surface and ruin the effect.
You can go to http://www.howtorefinishkitchencabinets.net to read more about Refinishing kitchen cabinets.
Comments
You must be logged in to post a comment.